JBL Synthesis SCL-8 In-Ceiling Speaker

The JBL Synthesis SCL-8 is the most compact round in-ceiling model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as a height channel or in-ceiling LCR or surround channel loudspeaker. The SCL-8 features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with an angled 5.25-inch (130mm) Advanced Aluminum Matrix cone cast-frame woofer operating behind an acoustic aperture waveguide.

In Stock | Next Day Delivery Available

SKU JBL-SCL-8
Colour White

Description / JBL Synthesis SCL-8 In-Ceiling Speaker

About the JBL Synthesis SCL-8

The most compact round in-ceiling model in the JBL Synthesis Custom Loudspeaker (SCL) series, the SCL-8 is designed for unparalleled performance in small to medium theater rooms for immersive applications as a height channel, or in high-performance two-channel applications and distributed whole-house audio.  The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 60 degrees from the listening position. The SCL-8 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in small to medium rooms.

Advanced Matrix Cone 

The SCL-8 features the patented JBL D2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn and an angled 5.25-inch advanced aluminum matrix cone cast-frame woofer with integral waveguide baffle allowing the loudspeaker to be “aimed”, focusing its output towards a specific listening area. The SCL-8 is acoustically designed to complement any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis solution.

Product Highlights

  • 2-way in-ceiling loudspeaker system designed for off-axis listening as height, in-ceiling LCR, and surround channels
  • Features 1-inch 2410H-2 compression driver tweeter mated to a JBL patented offset High-Definition Imaging (HDI™) horn assembly, angled toward listening area
  • Complemented with a 5.25-inch (130mm) advanced aluminum matrix cone, cast frame woofer with waveguide baffle, angled to match HDI horn
  • Patented Cat Claw mounting mechanism for faster installations
  • Gold plated, spring-loaded binding posts
  • Comes with paintable zero-bezel, magnetically attached round and square grilles
  • Compatible with CB8 pre-construction bracket

Specification

SKUJBL-SCL-8
Lead TimeIn Stock | Next Day Delivery Available........
Speaker Grille ShapeRound
ColourWhite
ManufacturerJBL
Overall Diameter273
Overall Width273
Overall Height273
Overall Depth120
Mounting Depth115
Cut-Out Size247
Impedance (Nominal)4 Ohm
Sensitivity ([email protected])85 dB/2.83V/1m (2pi anechoic)
Recommended Amp25 - 100 W RMS
Drivers Unit Complement5.25” (130 mm) advanced Aluminum Matrix cone cast-frame woofer (JW130Al-4), 1" (25 mm) 2410H-2 Teonex annular ring-diaphragm compression driver
Weight (Kg)3.5
Warranty5 Years

Downloads

Similar

JBL Synthesis SCL-5 In-Ceiling Speaker Front
£2,400.00 £2,000.00
Dali Phantom K-80 In Ceiling Speaker with no grille front side view
£479.00 £399.17
Monitor Audio CP-CT380-IDC In-Ceiling Speaker
£435.00 £362.50
The JBL Studio 2 8IC in-ceiling speaker
£389.00 £324.17

Leave a Review

Write Your Own Review
You're reviewing: JBL Synthesis SCL-8 In-Ceiling Speaker
Your Rating:
Loading...

You submitted your review for moderation.