The exact position to which a screen stops can be easily and accurately programmed using the remote control by:

 

STORE PRIMARY STOP:

 

STEP 1. Press Programming button briefly once. POSITION STATUS LED starts flashing.

 

STEP 2. The flashing will continue for approx.10 seconds. Then the screen will lower automatically.

 

STEP 3. Press STOP button when screen is just above desired position.

 

STEP 4. Press DOWN button (multiple times) to fine tune the screen position.

 

STEP 5. Press STOP button again to store the final position.

 

STEP 6. Once the stop position is stored the POSITION STATUS LED will extinguish.

 

Your screen will now use this position as its Primary Stop position.

 

 

 

 

 

 

DELETE PRIMARY STOP:

 

STEP 1. Press PROGRAMMING button briefly once. POSITION STATUS LED starts flashing.

 

STEP 2. Press UP button whilst POSITION STATUS LED is flashing. (within 10 seconds)

 

The primary stop is now deleted.