Monitor Audio IWS-10
Model
MA-IWS-10
£350.00
£291.67
The IWS-10 is specified to produce excellent bass quality in a range of wall, ceiling, even floor locations, ideally but not exclusively with its IWB-10 back box.
Requires Monitor Audio IWA-250 Amplifier.
The IWS-10 subwoofer driver employs a rigid, flat 10” surface of 10 mm (3/8") RDT material derived from Monitor audio’s acclaimed ‘Platinum’ series of high-end speakers. A large vented pole helps to move air quickly, reducing power compression and increasing heat dissipation.
It features Monitor Audio’s patented Tri-Grip clamping system and paintable trim-less grille and frame edge.

Manufacturer | Monitor Audio |
---|---|
Model | MA-IWS-10 |
Overall Diameter | 302 x 302 x 92.28 mm |
Overall Depth | 92.28 mm |
Cut-Out Diameter | 280 x 280 mm |
Frequency Response | 28 Hz – 120 Hz (when mounted in optimum enclosure) |
Impedance (Nominal) | 8 Ohms |
Sensitivity (1W@1M) | 86 dB |
Maximum SPL | (Partnered with IWA-250) Single unit 109.8 dB; Pair 115.8 dB |
Power Handling (RMS) | 150 W |
Recommended Amp | IWA-250 |
Drivers Unit Complement | 1 x flat 10” surface of 10mm (3/8”) RDT® |
Adjustment Controls | N/A |
Fixing Type | 4 position Tri-Grip® dog leg fixings |
Construction Material | Mineral Filled ABS Plastic (RoHS2 Compliant) |
Weight | 3.8 kg |
Warranty | 3 years return to base. |
Packaged Weight (Kg) | 15.0000 |
Box Length (cm) | 30.0000 |
Box Width (cm) | 30.0000 |
Box Height (cm) | 30.0000 |