PureTheatre™  12v Trigger module with RS232 simply plugs into your PureTheatre Projector Screen or Lift.

This module adds trigger functionality allowing all control systems, projectors and AV amplifiers with a 12v output to be connect directly to you Pure Theatre Projector Screens and Lifts.

When the module receives a 12v Input signal the Screen / Lift will lower. When the signal is cut to 0v the Screen / Lift will raise.

When the Screen / Lift is lowered the output line is set to 12v. This can be directly connected to any projector with a 12v input to automatically turn the projector ON otrOFF as you raise and lower the lift.

The12v output will go high when the Screen / Lift is lowered. Once the Screen / Lift are retracted the 12v output is cut to 0v.

The RS232 port allows the Screen / Lift to be connected to a PC to allow firmware updates.

To download the firmware updater software please visit FirmwareUpdater.