12v Trigger Module with RS232 and IR outputFOR CR SCREENS AND LIFTS
PureTheatre™ 12v Trigger module with RS232 and IR OUTPUT simply plugs into your PureTheatre Projector Screen or Lift.
This module adds trigger functionality allowing all control systems, projectors and AV amplifiers with a 12v output to be connect directly to you Pure Theatre Projector Screens and Lifts.
When the module receives a 12v Input signal the Screen / Lift will lower. When the signal is cut to 0v the Screen / Lift will raise.
When the Screen / Lift is lowered the output line is set to 12v. This can be directly connected to any projector with a 12v input to automatically turn the projector ON or OFF as you raise and lower the lift.
With IR OUTPUT we can turn Panasonic and OPTOMA projectors ON and OFF without the need for any cables. The module will simply send out the ON and OFF signals via Infa Red.
The12v output will go high when the Screen / Lift is lowered. Once the Screen / Lift are retracted the 12v output is cut to 0v.
The RS232 port allows the Screen / Lift to be connected to a PC to allow firmware updates.
To download the firmware updater software please visit FirmwareUpdater.
|Packaged Weight (Kg)||0.0000|